Daktronics AF-3165-34-RGB Manuel d'utilisateur Page 17

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 97
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 16
Figure 8: Lifting the Display (Correct, Left; Incorrect, Right)
Do not attempt to permanently support the display by the eyebolts.
If removing the eyebolts, adequately seal the holes using 13 bolts and sealing
washers, ½ inch in size. Silicone along the threads to ensure that water does not enter
the display.
2.5 Display Mounting
Reference Drawings:
Shop Drawing, AF-3165-8-32 High-34-RGB; ............................. B-172745
Shop Drawing, AF-3165-40-48 High-34-RGB; ........................... B-172746
The method used to mount displays can vary greatly from location to location. For
this reason, only general mounting topics can be addressed in this manual.
It is the responsibility of the installer to ensure the installation will adequately
meet local codes and standards. The mounting hardware and method is also the
responsibility of the installer.
Before beginning the installation process, verify the following items:
The mounting structure will provide a straight and square-mounting frame
for the display. Height variation in any four-foot horizontal section may
not exceed ¼-inch.
The mounting structure will not give way at any unsupported points after
the display is mounted.
The back of the display is equipped with 2 x 2 x ¼" steel clip angles at the locations
shown in Drawings B-172745 and B-172746. These angles may be used for
mounting purposes. Remember to have all mounted displays inspected by a qualified
structural engineer. It is the customer’s responsibility to determine the proper wall
mounting method and location.
Refer to Drawings B-172745 and B-172746 for a suggested wall mount method. The
number of attachment points needed and the wall structure must be reviewed by a
qualified structural engineer and meet all national and local codes. Daktronics
recommends using all clip angles as attachment points.
Mechanical Installation
2-3
Vue de la page 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 96 97

Commentaires sur ces manuels

Pas de commentaire